They look so clean and work amazing thank you so much !!!!
The stock brake levers on the Tuttio Soleil 01 and Yozma In 10 are functional but far from inspiring — the pivot quality, feel, and adjustability just aren't there for riders who want precise, confident braking control. The Soleil Supplies Upgraded Brake Levers are a direct replacement for both front and rear, offering a noticeably smoother pivot action, adjustable reach to match your hand size and riding position, and a more responsive, premium feel that translates directly into better brake modulation every time you squeeze.
If you've upgraded your brakes or are planning to, the lever is the interface between you and the system — and it makes sense to upgrade it too. Better levers make better brakes work even better.
What's Included
- Set of 2 upgraded brake levers (front and rear)
- Replacement pivot piece
- Mounting hardware (reuse existing spring, bolt, and spacer)
Features
- Smoother, more precise pivot feel than stock levers
- Adjustable reach to dial in fit for different hand sizes and riding styles
- Better grip surface for more controlled braking input
- Direct replacement for stock brake levers — no modification required
- Compatible with both stock and upgraded brake systems
- Premium finish and construction compared to OEM levers
Installation: Brake Lever
Repeat for both front and rear levers. Tool needed: 4 mm hex key.
- Loosen the Clamp Bolt — Back off the clamp bolt on the existing lever assembly until it slides freely along the handlebar.
- Remove the Old Lever — Slide the lever assembly off the handlebar. Disconnect the brake cable if needed by backing off the barrel adjuster and releasing the cable anchor bolt.
- Transfer the Cable to the New Lever — Thread the brake cable through the new lever's cable guide and seat the cable end into the lever's cable anchor.
- Position the New Lever — Slide the new lever onto the handlebar at your preferred angle. A slight downward angle (10–15°) works well for most riders.
- Tighten the Clamp Bolt — Snug the clamp bolt with a 4 mm hex key. Do not fully torque yet.
- Adjust Reach — Use the reach adjuster to set lever distance from the bar to match your hand size and riding position.
- Set Cable Tension — Use the barrel adjuster to dial in cable tension. The lever should engage braking within the first third of its travel.
- Final Torque & Test — Tighten the clamp bolt fully. Squeeze the lever firmly several times and confirm no slipping, full spring return, and clean braking with no drag.
Installation: Pivot Piece Replacement
Only follow these steps if you notice brake drag or if the original pivot bolt resists threading. Tool needed: 4 mm hex key.
- Loosen & Remove Lever — Back off the clamp bolt and slide the lever assembly off the handlebar.
- Push Out the Pivot Bolt — Apply steady inward pressure; the bolt slides free without force.
- Remove Pivot Assembly — Note the order: pivot piece → coil spring → metal spacer.
- Inspect the Lever Body — Wipe the bore clean before fitting the replacement pivot piece.
- Thread Spring onto Bolt — Seat the coil spring with the free tail pointing outward.
- Insert Assembly into Lever — Hook the spring tail into the notch inside the lever body.
- Install Replacement Pivot — Press the new pivot piece flush against the lever body with no visible gap.
- Tighten with 4 mm Hex Key — Snug-tight, then back off a quarter turn so the lever pivots freely.
- Reinstall and Test — Clamp lever back on the bar. Pull the brake — lever springs back fully with no drag.
Compatibility
- Tuttio Soleil 01
- Yozma In 10
Soleil Supplies original products are processed and shipped within 1–2 business days. Partner-fulfilled items may take up to several days for processing and shipping.
